Cape Town Globus Data Path - SC26 Demo ( public )

Builds a Globus Connect Server 5.4 data transfer node (DTN) on FABRIC that exchanges data with the SANReN Cape Town DTN over a dedicated research VLAN (AmLight / RNP) instead of the public internet. Globus control traffic reaches the DTN on a public address; the GridFTP data takes the VLAN, because that is the address the endpoint advertises as its data interface. Built for the SC26 CryoEM Without Borders demo.

Source: github.com/kthare10/cape-globus-l2

What it builds

  • One Rocky 9 VM per run, at FIU (default) or CIEN: slice <prefix>-fiu or <prefix>-cien. Run it twice with the same prefix for both sites.
  • Data NIC bridged through an L2 facility port onto the Cape Town VLAN (FIU: AmLight-EXP-Layer2-FIU, CIEN: FP2-CIEN), jumbo frames, duplicate-address and reachability checks.
  • Public uplink for Globus control (FIU: AmLight-Layer3-FIU with AmLight-assigned IPv4/IPv6, CIEN: FABNetv4Ext), firewalled to TCP 443 and 50000-51000.
  • Globus Connect Server endpoint and one mapped collection, registered with a Globus service credential; the data interface can be switched between the VLAN and the public address.
  • A demo web app on the DTN (reach it with a LoomAI tunnel to node dtn, port 8080): path diagram, FABRIC and AmLight maps, Globus sign-in, transfers to and from Cape Town, and a live chart of which network carried the bytes.
  • A notebook (globus_transfer_demo.ipynb) with the same checks, transfers, live charts, and an optional step to unregister the endpoint.

FABRIC permissions (project tags)

  • FIU: Net.FacilityPort.AmLight-Layer3-FIU and Net.FacilityPort.AmLight-EXP-Layer2-FIU
  • CIEN: Net.FacilityPort.FP2-CIEN and Net.FABNetv4Ext
  • Net.AllFacilityPorts covers all the facility-port tags above.
  • VM size (default 8 cores, 32 GB RAM, 500 GB disk): VM.NoLimitCPU, VM.NoLimitRAM, VM.NoLimitDisk (or VM.NoLimit). With smaller CORES/RAM/DISK values these may not be needed.

The weave uses your default FABRIC project (LoomAI: Configure), prints it at the start, and warns if a needed tag is missing.

Other prerequisites

  • Globus service credential for Globus Connect Server (app.globus.org > Settings > Developers > your project > Add a service credential). Enter the client ID and secret on the first run; the weave saves them locally (mode 0600).
  • Globus identity for GLOBUS_USERS with read/write access to the Cape Town collection (35df6f87-df63-11f1-977e-02ffe3faed53), plus a contact email.
  • Network coordination: AmLight-assigned public VLAN and addresses at FIU (defaults: VLAN 3002, 67.17.206.74/29, 2800:bc0:9000:3002::2/64), and the operators mapping the FABRIC data VLAN (4000-4094 at FIU) to Cape Town's VLAN 1400.
  • Optional: Globus subscription, only to grant an administrator role on the endpoint.

Usage

  1. Pick a site, enter a slice prefix, the Globus credential (first run), GLOBUS_USERS and the contact email. Leave the network fields blank to use the site's defaults.
  2. Run. The log ends with the collection link and how to open the demo app.
  3. Open the notebook or the demo app to run transfers and see which path carried the data.
  4. Stop unregisters the Globus endpoint first, then deletes the slice; it keeps the slice if unregistering fails.
Views
13
Downloads
5 active (0 retired)
Versions
1
Last Updated
Nov. 13, 2026, 10:01 p.m.
Version Created URN Downloads Actions
v0.2.0 c77f2d2 Nov. 14, 2026, 10:43 p.m. urn:git:contents:github:f11fb033-e3da-4942-bee8-58fc60dc614b 5 download
University of North Carolina at Chapel Hill — kthare10@email.unc.edu